The Other Corner Café Kit by DPM Landmark Structures

By Ty’s Model Railroad - 1/29/2012 01:27:00 PM

Completed DPM The Other Corner Café kit modeled as a bank

I wanted to add a bank to my small commercial district and the DPM Other Corner Café kit by Woodland Scenics fit the bill perfectly. This was my first DPM kit and if you have never built one either, it’s a very good idea to follow the preparation directions before assembling the model. The Design Preservation Model (DPM) series kits have high quality details and styrene but do require a good amount of sanding and trimming before assembly.

Completed DPM The Other Corner Café kit modeled as a bank

As I did with my Merchant’s Row I kit, I used small strips of masking tape to mask the windows and trim before painting the brick walls. Once the walls were dry, I covered the newly painted sections so I could now paint the trim and window frames. After drying for 24 hours, any touch-ups were made with a small detailing brush. The masking is tedious but worth it in the end. However, it’s only effective if it’s done correctly and carefully. If not, you will have a ton of touch-ups to deal with. The structure was then brushed with dark powdered pastels for weathering effects and sealed with a final coat of Testors dull coat.

Removable interior scene depicting a bank with a styrene light diffuser attached on top for Other Corner Café kit

Most DPM models do not come with a pre-molded roof or base though bulk styrene is provided for at least the roof. This needs to be cut to fit. A length of strip styrene is also provided to create supports for the roof panel. Clear bulk styrene is also included for the window glazing. Window blinds were used from the same templates I used on previous structures that I built.

Removable interior scene depicting a bank with a styrene light diffuser attached on top for Other Corner Café kit

I built the interior structure of this building in almost the exact same way as may Merchant’s Row I kit, utilizing my light diffuser box method. The first level interior of the building is built upon a removable styrene base with the light box installed on second floor. The removable base allows access to the bulb in case it ever needs to be changed. 

Custom built styrene light diffuser box with bulb and steel wire leads for Other Corner Café kit

I built the bank’s teller desks out of scrap styrene pieces, as well as the large support column which actually supports the light diffuser box on top. The bank’s floor is a tile design that I made in Adobe Photoshop and printed on matte photo paper. The walls are coloured cardstock.

Removable interior scene depicting a bank with a styrene light diffuser attached on top for Other Corner Café kit

The second level interiors are attached directly to the main structure. I built these with a combination of coloured cardstock and styrene which I secured directly to the inside walls. When the base and light box are inserted, the light box sits just behind the second level interior rooms. To allow light into the rooms, I simply cut doorways into the back walls. For the rooms I didn’t want to light, I simply omitted cutting in a door.

Custom second level interior made of cardstock for a DPM The Other Corner Café kit

I decorated the final structure with dry transfer decals from Woodland Scenics as well as a vertical corner sign that was left over from my Merchant’s Row I kit. For the roof material, I used medium burnt cinders from Woodland Scenics which I spread about 1/8” thick. I then secured the cinders with thinned white glue that I applied with a small pipette, mixed with a few drops of isopropyl alcohol to break the glue mixture’s surface tension.

Completed DPM The Other Corner Café kit modeled as a bank

Sand covered roof of a completed DPM The Other Corner Café kit modeled as a bank

Completed DPM The Other Corner Café kit modeled as a bank showing interior lighting effects

Completed DPM The Other Corner Café kit modeled as a bank showing interior lighting effects

  • Share:

You Might Also Like

3 comments

  1. What colors did you use for the bricks and trim?

    Nice Job!!

    ReplyDelete
    Replies
    1. Hey, thanks for the comment. For the bricks, I used Humbrol #26 Khaki, and for the trim I used Humbrol #147 Light Gray, which I lightened very slightly with a couple drops of #34 white.

      Delete
  2. Board of Secondary Education, Assam is known as SEBA is conducted the English subject examination tests along with all examination tests for all government and private schools General curriculum and vocational course students as Unit Tests, Term, three months (Quarterly), Assam HSLC English Model Paper six months (Half Yearly), Pre-Final and annual final public examination tests to the academic year of 2023.

    ReplyDelete