Sunday, January 29, 2012

The Other Corner Café Kit

The Other Corner Café kit by DPMI wanted to add a bank to my small commercial district, and the DPM Other Corner Café kit by Woodland Scenics fit the bill perfectly. This was my first DPM kit, and if you have never built one either, it’s a very good idea to follow the preparation directions before assembling the model. The Design Preservation Model (DPM) series kits have high quality details and styrene but do require a good amount of sanding and trimming before assembly.
As I did with my Merchant’s Row I kit, I used small strips of masking tape to mask the windows and trim before painting the brick walls. Once the walls were dry, I covered the newly painted sections so I could now paint the trim and window frames. After drying for 24 hours, any touchups were made with a small detailing brush. The masking is tedious, but worth it in the end, however it’s only effective if it’s done correctly and carefully. If not, you will just have a ton of touchups to deal with. The structure was then brushed with dark powdered pastels for weathering effects and sealed with a final coat of Testors dull coat.

Blind assortment on 8” x 10” matt photo paper

Most DPM models do not come with a pre-molded roof or base, however bulk styrene is provided for at least the roof, which needs to be cut-to-fit. A length of strip styrene is also provided to be cut and installed to support for the roof. Clear bulk styrene sheet(s) are also included for the window glazing. Window blinds were used from the same templates I used on previous structures that I built.

Removable first level of bank interior and light diffuserRemovable first level of bank interior and light diffuser


Styrene light diffuser boxFirst level interior with lit diffuser box

I built the interior structure of this building in almost the exact same way as may Merchant’s Row I kit, utilizing my light diffuser box method. The first level interior of the building is built upon a removable styrene base, with the light box installed on top (2nd level). The removable base allows access to the bulb in case it ever needs to be changed. I built the bank’s teller desks out of scrap styrene pieces, as well as the large support column (which actually supports the light diffuser box). The bank’s floor is a tile design that I made in Adobe Photoshop and printed on matt photo paper. The walls are just coloured cardstock.

Second level interior of the Other Corner Café kitSecond level interior of the Other Corner Café kit


The Other Corner Café kit with lightingBank interior with lighting

The second level interiors are actually attached directly to the main structure. I built these with a combination of dark cardstock and styrene plastic, which I secured directly to the inside walls. When the base and light box are inserted, the light box sits just behind the second level interior rooms. To allow light into the rooms, I simply cut small openings into the back walls. For the rooms I didn’t want to light, I simply omitted the rear opening to keep them dark.

Bank roof with medium burnt cinders from Woodland ScenicsThe Other Corner Café kit by DPM


The Other Corner Café kit by DPMThe Other Corner Café kit by DPM

I decorated the final structure with dry transfer decals from Woodland Scenics on the windows as well as a vertical corner sign that was left over from my Merchant’s Row I kit. For the roof material, I used medium burnt cinders from Woodland Scenics, which I spread about 1/16” – 1/8” thick. I then secured the cinders with thinned white glue that I applied with a small pipette, mixed with a few drops of isopropyl alcohol to break the glue mixture’s surface tension.

2 comments:

  1. What colors did you use for the bricks and trim?

    Nice Job!!

    ReplyDelete
    Replies
    1. Hey, thanks for the comment. For the bricks, I used Humbrol #26 Khaki, and for the trim I used Humbrol #147 Light Gray, which I lightened very slightly with a couple drops of #34 white.

      Delete